Saves money by matching the type and amount of metering exactly to your needs
Submetering Tailored
To Your Needs
Monitoring made to measure
Packet Power offers a range of wireless full power and current-only monitors that support up to 8 current sensors and are line-powered on circuits up to 600V.
Purchase the meter by itself or cut installation time in half by ordering the meter configured and fully assembled with your choice of:
- Voltage source type
- Split core, solid core or flexible coil current sensors in a wide range of ratings and sizes
- Enclosure type
- Over-current protection
Benefits
No data communications cables
Buy the monitor alone or a fully configured system ready to be installed
Ideal for monitoring high-value circuits to track loads from HVAC, generators, motors, and sub-panels
Data is accessible via SNMP, Modbus, Bacnet/IP, MQTT, or our EMX monitoring software
Secure purpose-built wireless protocol proven in critical facilities across industries worldwide
Compact Wireless Power Monitors
MP277
100 - 480/277V AC
1 - 8 CTs
MP480
480V and 600/347V AC
1 - 3 CTs
Wireless Power Monitor Features
15A to 10,000A single- and three-phase circuits; 100V to 600V AC
Full power or current-only monitoring
Full power measures V, A, VA, W, PF, Wh, Hz, IR pulse output
Net metering capable
Choice of split core CTs, flexible Rogowski coil sensors or solid core CTs
Enclosure options available including DIN clip, gangbox and NEMA 4X
Local OLED or LED displays
Secure wireless transmission of monitoring data, separate from wired data network
Extensive range of AC current sensors
Split core CTs
15A to 4000A | 10mm to 150mm ID
Solid core CTs
30A to 400A | 8mm to 32mm ID
Rogowski coils
100A to 10,000A | 250mm to 1000mm coil length
Split core CTs and Rogowski coils include 2.5m leads
Quick disconnects make installation easier
Instant access to data
Data begins to flow immediately upon installation to your existing BMS and DCIM systems (via SNMP, Modbus, Bacnet/IP and MQTT) or the Packet Power EMX Energy Portal. Unlike many monitoring systems, there’s no need to wait for expensive consultants to customize the system before you can gain value from the monitoring information.